Your browser does not support JavaScript. Please activate this feature in order to ensure your order is properly placed. DIY Suction Cup Rack Kit Self Reliance Outfitters

VISIT OUR CLEARANCE SECTION FOR GREAT CLOSEOUT DEALS!

DIY Suction Cup Rack Kit

Spring Creek Manufacturing’s Do It Yourself Suction Cup Rack Kit provides all the parts you’ll need to convert a standard 2×4 into a rock-solid rack at an inexpensive price. You will get everything to make ONE rack, including two suction triangles, a strap for easy attachment, and hardware. *15′ Rack Straps Sold Separately*  2X4 NOT INCLUDED

Directions:

To construct your rack, you first have to decide what length 2×4 you will need.

If you are going to be hauling wider loads, we would recommend using a 78” 2×4. If you are hauling smaller loads, use a 2×4 that is slightly larger than the width of your vehicle.

Bolt the suction cup frames to the 2×4’s so the cups are to the outside edges of your roof, by drilling a 3/8” hole (or a little bigger, if you want to remove it later – to allow for wood swelling.)

Set the rack on the roof to see where to place the buckles and buckle holders to make sure they are pulling straight down and drill two other slightly over 3/8” holes and bolt on the buckle brackets. Then, place black eye pads on the ends of the 2×4’s where you wish, and bolt them on.

Black straps must be placed through the cab of the vehicle by opening doors and then snugging down securely.

This includes hardware to make ONE rack.

*2X4 Not Included*

 

 

 

This item ships directly from the Spring Creek Manufacturing in Mountain Iron, MN. It will arrive as a seperate shipment from any other items that were in your cart at checkout. Most items will ship within 1 to 2 business. 

NOTE: Once the order for this item is placed it cannot be cancelled. 

Product Video

DIY Suction Cup Rack Kit

$110.00 USD

SKU:PS-1017
Weight: 3.0 lb

Add to Wishlist

Product Description

Spring Creek Manufacturing’s Do It Yourself Suction Cup Rack Kit provides all the parts you’ll need to convert a standard 2×4 into a rock-solid rack at an inexpensive price. You will get everything to make ONE rack, including two suction triangles, a strap for easy attachment, and hardware. *15′ Rack Straps Sold Separately*  2X4 NOT INCLUDED

Directions:

To construct your rack, you first have to decide what length 2×4 you will need.

If you are going to be hauling wider loads, we would recommend using a 78” 2×4. If you are hauling smaller loads, use a 2×4 that is slightly larger than the width of your vehicle.

Bolt the suction cup frames to the 2×4’s so the cups are to the outside edges of your roof, by drilling a 3/8” hole (or a little bigger, if you want to remove it later – to allow for wood swelling.)

Set the rack on the roof to see where to place the buckles and buckle holders to make sure they are pulling straight down and drill two other slightly over 3/8” holes and bolt on the buckle brackets. Then, place black eye pads on the ends of the 2×4’s where you wish, and bolt them on.

Black straps must be placed through the cab of the vehicle by opening doors and then snugging down securely.

This includes hardware to make ONE rack.

*2X4 Not Included*

 

 

 

This item ships directly from the Spring Creek Manufacturing in Mountain Iron, MN. It will arrive as a seperate shipment from any other items that were in your cart at checkout. Most items will ship within 1 to 2 business. 

NOTE: Once the order for this item is placed it cannot be cancelled. 

Product Reviews

Customer Reviews

Based on 10 reviews Write a review

You May Also Like

Recently Viewed

Back to Top
x